 |
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
 |
 |
 |
 |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
| DATA ACQUISITION SOFTWARE UPGRADE |
For CyberScan Series 5000 Bench Meters |
|
|
|
|
Bench Meter For customers of our CyberScan pH1100/2100 and CyberScan Series 1500 bench meters, we provide a software that connects to the bench meter using an RS232 communications cable and can be used to control the meter from a PC. The software also provides Data Acquisition functions and allows data from the meter to be captured and stored for processing on a PC. This software is already included in the CDROM that ships with the meter. However, if you lose the CDROM or wish to upgrade your software, you can download the latest copy here. The latest version of our software is version V2.4. This latest version is a major upgrade and features the ability to view real-time plots while capturing data. The software is compatible with Windows 95® and above. Other features of the software are the ability to zoom in to certain areas of the graph, set the length of time to capture data, set meter settings like temperature units, pH and mV alarm limits, calibration reminders, resolution and many other parameters.
|
|
|
Latest Releases |
|
|
Click on the link below to download into your PC, unzip the folder after download and follow the instructions carefully. Download the respective manual for usage along with your CyberScan bench meter: Instruction Manual for CyberComm Pro for CyberScan pH 1100/2100 Bench Meters Instruction Manual for CyberComm Pro for CyberScan pH 1500 Bench Meter Instruction Manual for CyberComm Pro for CyberScan CON 1500 Bench Meter Instruction Manual for CyberComm Pro for CyberScan DO 1500 Bench Meter
|
|
|
|
|
|
Portable Meter For users of our CyberScan
pH100/CON110 portable meters, the new CyberComm portable software can
be run on Windows® OS. |
|
|
Click on the link below to download and follow the instructions carefully. For more details, please refer to the operating instruction (pdf format) below on the use of this DAS. |
|
|
Should you still encounter any problems with the software, email your queries to marketing@eutechinst.com. Note: This product is protected by copyright and other intellectual property laws and treaties. Eutech Instruments owns the title, copyright and other intellectual property rights of the Product. ® Windows 95 and ® Windows are registered trademark of the Microsoft Corporation.
Last updated on 28 Jan 2004. Copyright © 1997 Eutech Instruments Pte Ltd |
|
