Product
Specification |
Description |
| Conductivity |
| Range |
... to 2 µS/cm ; ... to 20 µS/cm ;
... to 200 µS/cm ; ... to 2000 µS/cm ;
... to 20 mS/cm ; ... to 200 mS/cm |
| Resolution |
0.001 µS/cm ; 0.01 µS/cm ;
0.1 µS/cm ; 1 mS/cm ;
0.01 mS/cm ; 0.1 mS/cm |
| Accuracy |
±1 % full scale |
| Cell Constant |
k = 0.1, 1.0, 10.0 |
| Temperature |
| Range |
-10.0 to 125.0 ºC / 14.0 to 157.0 ºF |
| Resolution |
0.1 ºC / 0.1 ºF |
| Accuracy |
±0.5 ºC / ±0.9 ºF |
| Sensor |
Pt100; 2 or 3 wire |
| Compensation |
Auto/manual |
| Coefficient |
0 to 10 % (selectable) |
| Normalization |
20.0 to 25.0 ºC (selectable) |
| Controller |
Set Point 1 (SP1) /
Set Point 2 (SP2) |
... to 2 µS/cm or ... to 20 µS/cm or
... to 200 µS/cm or ... to 2000 µS/cm or
... to 20 mS/cm or ... to 200 mS/cm |
| Switching Conductivity Hysteresis |
0 to 10 % full scale reading |
| Function (Switchable) |
Limit control; off |
| Pickup/Dropout Delay |
0 to 2000 sec |
| Contact Outputs |
2 SPST relays |
| Switching Voltage/Current Power |
1/8 HP:
at 125 VAC / max. 0.74 A / max. 93 VA
1/8 HP:
at 250 VAC / max. 0.37 A / max. 93 VA |
| Electrical
Data And Connections |
| Conductivity Input |
2-pin terminal |
| Connection Terminal |
2-pin & 8-pin terminal, detachable blocks;
DC jack |
| Display |
LCD
|
7 segments display with symbols for status information |
| Backlight |
Yes (on/off selectable) |
| Power
Supply |
Input
|
12 to 24 V DC or 9 V DC |
| EMC Specifications |
| Emitted Interference |
According to EN 61326 |
| Immunity
To Interference |
According to EN 61326 |
| Environmental Conditions |
| Operating Temperature Range |
0 to 40 ºC |
| Max. Relative Humidity |
80 % up to 31 ºC decreasing linearly to 50 %
at 40 ºC |
| Mechanical
Specifications |
| Dimensions (WxHxD) |
96 x 96 x 66 mm |
| Weight |
210 g (unit) / 310 g (packed) |
| Ingress Protection |
IP65 |
Sitemap
