Product
Specification |
Description |
Dissolved Oxygen |
Range |
0.00 to 25.00 mg/L or ppm;
0.0 to 300.0 %
(For TSDOCTP2000W) |
0.00 to 20.00 mg/L or ppm;
0.0 to 200.0 %
(For TSDOCTP2000WPG &
TSDOCTP2000PPG)
|
Resolution
|
0.01 mg/L or ppm; 0.1 % |
Accuracy |
±1.5 % of full scale reading
(For TSDOCTP2000W) |
±1 % of full scale reading
(For TSDOCTP2000WPG &
TSDOCTP2000PPG) |
Temperature |
Range |
-10.0 to 125.0 ºC / 14.0 to 257.0 ºF |
Resolution |
0.1 ºC / 0.1 ºF |
Accuracy |
±0.5 ºC / ±1.0 ºF |
Sensor |
Pt100/Pt1000 (jumper selectable);
2 or 3 wire
(For TSDOCTP2000W) |
NTC 22 kOhm thermistor
(For TSDOCTP2000WPG &
TSDOCTP2000PPG) |
Compensation |
Temperature
Compensation |
Auto/manual |
Salinity
Compensation |
0.0 to 50.0 ppt (manual setting and automatic correction) |
Pressure
Compensation |
0.740 to 3.000 bar ; 555 to 2250 mmHg ;
10.73 to 43.51 psi (manual setting and automatic correction) |
Set
Point And Controller Functions |
Set Point 1 (SP1) /
Set Point 2 (SP2) |
0.00 to 25.00 mg/L or ppm;
0.0 to 300.0 %
(For TSDOCTP2000W) |
0.00 to 20.00 mg/L or ppm;
0.0 to 200.0 %
(For TSDOCTP2000WPG &
TSDOCTP2000PPG) |
Switching DO Hysteresis |
0 to 10.0 %
(For TSDOCTP2000W) |
0.1 to 1.0 mg/L or
1.0 to 10.0 %
(For TSDOCTP2000WPG &
TSDOCTP2000PPG) |
Function (Switchable)
|
P/PI control (pulse length/pulse frequency/proportional integral);
limit control; off |
Adjustable Period With Pulse Length Controller |
0.5 to 20 sec |
Adjustable Period With Pulse Frequency Controller |
60 to 120 pulse/min |
Integral Action Time (IAT)
|
0.0 to 999.9 min |
Pickup/Dropout Delay |
0 to 2000 sec |
Wash Cycle |
0.1 to 200.0 hr |
Wash Duration |
1 to 2000 sec |
Contact Outputs |
1 SPDT, 3 SPST relays |
Switching
Voltage/ Current/Power |
1/8 HP: at 125 VAC / max. 0.74 A / max. 93 VA
1/8 HP: at 250 VAC / max. 0.37 A / max. 93 VA
(For TSDOCTP2000W) |
Max. 250 VAC / max. 3 A /
max. 600 VA
(For TSDOCTP2000WPG &
TSDOCTP2000PPG) |
Alarm
Functions |
Function (Switchable) |
Steady or fleet (pulse) |
Pickup Delay |
0 to 2000 sec |
Switching
Voltage/ Current/Power |
1/8 HP: at 125 VAC / max. 0.74 A / max. 93 VA
1/8 HP: at 250 VAC / max. 0.37 A / max. 93 VA
(For TSDOCTP2000W) |
Max. 250 VAC / max. 3 A /
max. 600 VA
(For TSDOCTP2000WPG &
TSDOCTP2000PPG) |
Electrical
Data And Connections |
Transmitter
Function |
Two 0/4 to 20 mA outputs for Dissolved Oxygen values and temperature, galvanically isolated |
CU 22 Function |
22 mA current output
(For TSDOCTP2000W) |
–
(For TSDOCTP2000WPG &
TSDOCTP2000PPG) |
Isolated Output Voltage |
12 V ±0.5 V (max. 50 mA) |
Hold Function Switch |
To freeze output current and deactivate control relays |
Load |
Max. 600 Ohm |
DO Input |
2-pin terminal |
Connection Terminal |
5-pin, 8-pin, 9-pin & 13-pin terminal, detachable blocks
(For TSDOCTP2000W) |
2x 3-pin, 8-pin, 9-pin & 13-pin terminal blocks
(For TSDOCTP2000WPG) |
3-pin, 9-pin & 19-pin
terminal blocks
(For TSDOCTP2000PPG) |
Display |
LCD
|
UV coat, backlit 14 segments display with symbols for status information |
Backlight |
On/off selectable with four level of brightness control |
Power
Supply |
Input
|
80 to 250 VAC/DC ; 50/60 Hz ; 10 VA |
Main Fuse |
315 mA, anti surge, 250 V
(For TSDOCTP2000W) |
250 mA, anti surge
(For TSDOCTP2000WPG &
TSDOCTP2000PPG) |
Electromagnetic
Compliance |
Emitted Interference |
According to EN 61326 |
Immunity To Interference |
According to EN 61326 |
Environmental Conditions |
Operating Temperature Range |
0 ºC to 50 ºC |
Max. Relative Humidity |
80 % up to 31 ºC decreasing linearly to 50 % at 40 ºC |
Mechanical
Specifications |
Dimensions (WxHxD) |
144 x 144 x 111.5 mm
(For TSDOCTP2000W) |
144 x 144 x 110 mm
(For TSDOCTP2000WPG) |
175 x 96 x 96 mm
(For TSDOCTP2000PPG) |
Weight |
745 g (unit) / 1100 g (packed)
(For TSDOCTP2000W & TSDOCTP2000WPG) |
700 g (unit) / 850 g (packed)
(For TSDOCTP2000PPG) |
Ingress Protection |
IP66 (NEMA 4X)
(For TSDOCTP2000W & TSDOCTP2000WPG) |
IP54 (front panel)
(For TSDOCTP2000PPG) |