Product
Specification |
Description |
| Conductivity |
| Range |
... to 10.00 ppm ; ... to 100.0 ppm ;
... to 1000 ppm ; ... to 5.00 ppt ;
... to 10.00 ppt ; ... to 100.0 ppt |
| Resolution |
0.01 ppm ; 0.1 ppm ;
1 ppm ; 0.01 ppt ;
0.1 ppt |
| Cell Constant |
0.1 ; 1 ; 10 |
| Relative Accuracy |
±1 % of full scale |
| Temperature |
| Range |
-10 to 110 ºC |
| Resolution |
0.1 ºC |
| Accuracy |
±0.5 ºC |
| Sensor |
Pt100; 2 or 3 wire |
| Compensation |
Auto/manual (0 to 50 ºC) |
| Coefficient |
0.0 to 5.0 % |
| Normalisation |
10.0 ºC to 30.0 ºC |
| TDS |
| Factor |
0.40 to 1.0 |
| Set
Point And Controller Functions |
Set Point 1 (SP1)/
set Point 2 (SP2) |
... to 10.00 ppm or ... to 100.0 ppm or
... to 1000 ppm or ... to 5.00 ppt or
... to 10.00 ppt or ... to 100.0 ppt |
| Switching Conductivity Hysteresis |
0 to 10 % of full scale |
| Switching TDS Hysteresis |
0 to 10 % of full scale |
| Function |
Limit control |
| Contact Outputs |
2 SPDT relays |
Switching
Voltage/
Current/Power |
Max. 250 VAC / max. 3 A / max. 600 VA |
| Electrical
Data and Connections |
| Transmitter Function |
4 to 20 mA scalable outputs for Conductivity, galvanically isolated |
| Load |
200 Ohm |
| Conductivity/TDS Input |
2-pin terminal |
| Connection Terminal |
3-pin, 7-pin & 9-pin terminal, detachable blocks, 1 fixed connector |
| Display |
| LED |
7 segments display |
| Power Supply |
| Input |
85 to 250 VAC, 50/60 Hz |
| Main Fuse |
250 mA, anti-surge, S504 Bussman |
| Rated Input Current (Max.) |
100 mA |
| Insulation Category |
II |
| EMC Specifications |
| Emitted Interference |
According to EN 61326 |
| Immunity To Interference |
According to EN 61326 |
| Environmental
Conditions |
| Operating Temperature Range |
-10 to 50 ºC |
| Max. Relative Humidity |
10 to 95 % (non-condensing) |
| Mechanical
Specifications |
| Dimensions (WxHxD) |
96 x 48 x 150 mm |
| Weight |
300 g (unit) / 350 g (packed) |
| Ingress Protection |
IP50 |
Sitemap
