Product Features
| :: |
User-Customisation
through Scrolling Menu, 14-Segment LED
- intuitive user interface guides user
easily through setup functions |
| |
|
| :: |
Symmetrical Mode Operation
eliminates electronic noise problems when
used with solution ground |
| |
|
| :: |
Galvanically Isolated 4-20
mA Output for remote monitoring or hardcopy
recording |
| |
|
| :: |
Universal Power Supply Input
from 85 to 250 VAC/DC allows use at multiple
sites and withstands voltage fluctuations
|
| |
|
| :: |
Two Level Password Protection
prevents un authorized tampering with
settings |
| |
|
| :: |
Automatic Temperature Compensation
with 3-wire Pt 100 system ensures accurate
readings under fluctuating temperatures
|
| |
|
| :: |
Adjustable Hysteresis (Dead
Band) prevents rapid contact switching
near set point |
| |
|
| :: |
Non-Volatile Memory retains
all stored parameters and calibration
data even if power fails |
| |
|
| :: |
Easy Installation and Wiring
with detachable plug-in connectors |
Applications
General: Ideal
for virtually any batch type application where
pH or ORP control or adjustment is needed.
Use as ORP monitor for ozone systems and general
purpose pH monitor for all types of water
treatment and chemical processes.
Aquaculture: Use
for pH or ORP control in fish ponds and tanks.
Industrial:
Use to treat batches of incoming process water,
rinse water treatment, recirculating system
and wastewater treatment. Suitable for pH
or ORP control of plating tanks and chemical
processing tanks. Ideal for low cost monitor
with alarms for batch and process applications.
Perfect for wastewater neutralization in small
and medium sized batches.
Specifications
|
Product
Specification |
Description |
| pH
Range |
0.00
to 14.00 pH |
| Resolution
& Accuracy |
0.01
pH & ±0.01 pH |
| mV
Range |
-999
to 1000 mV |
| Resolution
& Accuracy |
1/
±2 mV |
| Temperature
Range |
-10
to 110 °C |
| Resolution
& Relative Accuracy |
0.1
°C & ±0.5 °C |
| Temperature
Sensor |
Pt
100 (3-wire) |
| Temperature
Compensation |
Auto
/ Manual (0°C to 100°C) |
| Set
Point and Controller Functions |
| Function |
Limit Control |
| Switching
pH/ORP Hysteresis |
0.00
to 2.00 pH or 0 to 300 mV |
| Contact
Outputs, Controller |
2
SPDT relays |
| Switching
Voltage/ Current/ Power |
Max 250 VAC/
Max 3A/ Max 600 VA |
| Electrical
Data and Connections |
| Power
Requirement |
85
to 260 VAC, 50/60 Hz or DC |
| Signal
Output/ Load |
4-20mA
galvanically isolated / 200Ω |
| pH/ORP
Input |
BNC
(1012 Ω Impedence) |
| Connection
Terminals |
3
detachable connectors (3-pin; 7-pin
& 9-pin terminal blocks) |
| Main
Fuse |
250mA,
Anti-surge (BUSSMAN S504 + 250mA) |
| Environmental
Conditions |
| Maximum
Relative Humidity |
80%
up to 31°C decreasing linearly to 50%
at 40°C |
| Ambient
Temp. Operating Range |
-10 to 50 °C (14 °F to 122°F) |
| Mechanical
Specifications |
| Dimensions |
96
x 48 x 150 mm |
| Weights |
300
g (boxed) |
Order Information
|
Order
No. |
Item |
| TSPHCTP0200 |
alpha
pH200 pH/ORP analyser with 4-20mA output
and 85-250 VAC/DC (Unit only). |
Sales
Enquiry
Service
Enquiry
Products > By Type > Controllers
& Transmitters Series
alpha-pH200
1/8 DIN 
Sitemap
