|
Product
Specification |
Description |
| pH |
| Range |
-2.00 to 16.00 pH |
| Resolution |
0.01 pH |
| Accuracy |
±0.01 pH |
| ORP |
| Range |
-1000 to 1000 mV / 0 to 100 % |
| Resolution |
1 mV / 0.1 % |
| Accuracy |
±1 mV / ±0.2 % |
| Temperature |
| Range |
-10.0 to 125.0 ºC / 14.0 to 257.0 ºF |
| Resolution |
0.1 ºC / 0.1 ºF |
| Accuracy |
±0.5 ºC / ±1.0 ºF |
| Sensor |
Pt100 / Pt1000 (jumper selectable); 2 or 3 wire |
| Compensation |
Auto/manual (independent process/CAL temperature) |
| Set
Point And Controller Functions |
Set Point 1 (SP1)/
Set Point 2 (SP2) |
-2.00 to 16.00 pH or -1000 to 1000 mV or
0 to 100 % |
| Switching pH Hysteresis |
0.1 to 1 pH |
| Switching ORP Hysteresis |
10 to 100 mV or 1 to 10.0 % |
| Function (Switchable) |
P/PI control (pulse length/pulse frequency/proportional integral); limit control; off |
| Adjustable Period With Pulse Length Controller |
0.5 to 20 sec |
| Adjustable Period With Pulse Frequency Controller |
60 to 120 pulse/min |
| Integral Action Time (IAT) |
0 to 999.9 min |
| Pickup/Dropout Delay |
0 to 2000 sec |
| Wash Cycle |
0.1 to 200.0 hr |
| Wash Duration |
1 to 2000 sec |
| Contact Outputs |
1 SPDT, 3 SPST relays |
| Switching
Voltage/ Current/Power |
1/8 HP: at 125 VAC / max. 0.74 A / max. 93 VA
1/8 HP: at 250 VAC / max. 0.37 A / max. 93 VA
|
| Alarm
Functions |
| Function (Switchable) |
Steady or fleet (pulse) |
| Pickup
Delay |
0 to 2000 sec |
Switching Voltage/
Current/Power |
1/8 HP: at 125 VAC / max. 0.74 A / max. 93 VA
1/8 HP: at 250 VAC / max. 0.37 A / max. 93 VA |
| Electrical
Data And Connections |
| Transmitter
Function |
Two 0/4 to 20 mA scalable outputs for pH/ORP and temperature, galvanically isolated |
| CU 22
Function |
22 mA current output |
| Isolated
Output Voltage |
12 V ±0.5 V (max. 50 mA) |
Hold
Function Switch
|
To freeze output current and deactivate control relays |
| Load |
Max. 600 Ohm |
| pH/ORP
Input |
BNC (1012 impedance); asymmetrical/symmetrical |
| Connection
Terminal |
3-pin, 8-pin, 9-pin & 13-pin terminal, detachable blocks
(For TSPHCTP2000W) |
3-pin, 9-pin & 19-pin
terminal, detachable blocks
(For TSPHCTP2000P) |
| Display |
LCD
|
UV coat, backlit 14 segments display with symbols for status information |
| Backlight |
On/off selectable with four levels of brightness control |
| Power
Supply |
Input
|
80 to 250 VAC/DC ; 50/60 Hz ; 10 VA |
| Main Fuse |
250 mA, anti-surge,
S504 Bussmann |
| Pollution
Degree |
2 |
| Transient
Overvoltage Category |
II |
| EMC Specifications |
| Emitted Interference |
According to EN 61326 |
| Immunity
To Interference |
According
to EN 61326 |
| Environmental Conditions |
| Operating Temperature Range |
0 to 40 ºC |
| Max. Relative Humidity |
80 % up to 31 ºC decreasing linearly to 50 %
at 40 ºC |
| Mechanical
Specifications |
| Dimensions (WxHxD) |
144 x 144 x 110 mm
(For TSPHCTP2000W) |
96 x 96 x 175 mm
(For TSPHCTP2000P) |
| Weight |
745 g (unit) / 1100 g (packed)
(For TSPHCTP2000W) |
550 g (unit) / 950 g (packed)
(For TSPHCTP2000P) |
| Ingress Protection |
IP66 (NEMA 4X)
(For TSPHCTP2000W) |
IP54 (front panel)
(For TSPHCTP2000P) |
Sitemap
