| :: |
New Design with
Isolated Output - The alpha 500 series
transmitter prevents output interference
due to electrical noise or leakage from
the input source. Cross talk between multiple
transmitters in the same loop is also
eliminated. |
| |
|
| :: |
NIST or USA pH BUFFER options
- alpha pH500 Transmitter allows user
to select USA (4.01, 7.00 or 10.01) or
NIST (4.01, 6.86 or 9.18) pH buffer standards
during calibration. |
| |
|
| :: |
Out-of-range Output Current
Indicator - Monitor your process effectively
using the optional out-of-range current
indicator. When the monitored value exceeds
the measurement
range, the alpha 500 Transmitter indicates
an out-of-range measurement by emitting
a 3.8
mA output current. |
| |
|
| :: |
Hold Output Current Indicator
- Use the optional HOLD output current
indicator for your process control purposes.
Configure the transmitter to emit the
pre-set 22 mA output current to indicate
‘HOLD’ mode during calibration or set
up mode. |
| |
|
| :: |
Symmetrical Mode of Operation
- Unique mode available in the Eutech
alpha pH500, allow the transmitters to
be operated in environments with electrical
interferences. Simply configure the transmitter
to the symmetrical mode and attach a potential
matching pin. |
| |
|
| :: |
Scalable 4/20 mA Current
Output - Assign pH or ORP values at 4
and 20 mA for better resolved output at
chart recorder or other peripheral devices. |
| |
|
| :: |
Custom Dual Display LCD
- Primary and secondary display are available
for simultaneous display of pH, ORP and
Temperature values. Allows instantaneous
viewing of measured readings and transmitter
set up configurations. |
| |
|
| :: |
Easy Push Button Operation
- Simply calibrate or adjust setup configuration
with just a few touches of the buttons.
The alpha pH500’s intelligent program
in prompts respective buffers for easy
calibration. |
| |
|
| :: |
Temperature Compensation
- Compensates variance in the measured
readings due to temperature fluctuations,
either Automatically (with Pt 100) or
Manually (Process and Calibration temperatures
can be set separately). |
| |
|
| :: |
Panel or Wall Mount, IP65
Weatherproof Housing - The alpha 500 series
transmitter has the
flexibility to be mounted on the wall
or in a control panel. In addition, the
IP65 rated housing
allows the transmitter to be installed
outdoors or indoors. Mounting accessories
are included
for both types of mounting. |
| |
|
| :: |
DC Voltage - Transmitters
operate on a 12 to 24V D.C. power supply
and multiples can be installed in a serial
loop. Operations are not disrupted even
if one of the transmitters requires service. |
| |
|
alpha-pH500
2-Wire LCD Display Transmitter
Sitemap
