| Industrial
Process Controllers & Monitors
alpha-CON
2000 Wall/ Panel Mount Conductivity Analyzer
-
Seven ranges in a
single controller allows the
controller to be used in a wide variety of applications with the maximum
range at 1000 mS/cm
-
User-Customization
through Advanced Setup Menu
offers flexibility in matching the controller's functions to suit
individual's specific requirement
-
Choice of 4-cell or
2-cell electrode system
-
Programmable for
On/Off, Proportional, or PI (Proportional Integral Control)
- ideal for most demanding precision
process control applications
-
Backlit Display
offers reading in low-light
conditions
-
Universal Power
Supply Input from 85 to 250 VAC/DC allows
use at multiple sites and withstands voltage fluctuations
-
Two
Galvanically Isolated Scaleable 0-20/4-20
mA Outputs
for Conductivity and temperature
-
Wash Contact Relay
controls electrodes cleaning systems at desired duration and frequency
-
Adjustable Hysteresis
(Dead Band) prevents rapid contact switching near set point
-
Non-Volatile
Memory retains all stored
parameters and calibration data even if power fails
-
Large Dual Display
shows measurement with temperature simultaneously - features clear
multiple icons, set points, and status messages
-
Choice of Temperature
Sensor Pt100/Pt1000 with 2-wire or 3-wire temperature input
selection
-
Rugged NEMA 4X housing
simplifies installation outdoors
and indoors. Pipe, Wall or Panel mount
-
Easy Installation
and Wiring with detachable plug-in connectors
-
Panel-mounted version
is also available
Applications
General: Use for virtually
any batch or online applications where rapid, accurate control. Great
for OEM/system integrator.
Industrial:
Use in applications involving agriculture, chemical processing,
boiler and water heaters, wafer-fab, microprocessor manufacturing,
pharmaceuticals, pulp and paper industries, and bleach manufacturing.
Water Purification/Treatment: Use to treat batches of incoming
process water, ultrapure water, boiler and feed water control.
Regulatory: Hook to
recorder to document data for regulatory compliance.
| Product
Code |
EC-CONCTP2000W
/ EC-C0NCTP2000P |
Conductivity
Range |
0.000
- 2.000, 20.00, 200.0, 2000 µS/cm;
20.00, 200.0, 1000 mS/cm |
Resolution
& Accuracy |
0.001,
0.01, 0.1, 1 µS/cm; 0.01, 0.1, 1 mS/cm
& ± 1% Full Scale (± 2% Full Scale > 500 mS/cm) |
Relative
Accuracy |
±1%
of full scale reading (±2% > 500 mS/cm) |
Temperature
Range |
-10.0
to +125.0°C (14.0 to 257.0°F) |
Resolution |
0.1°C/°F |
Relative
Accuracy |
±0.5°C
(±0.9°F) |
Sensor |
Pt100/
Pt1000 (jumper selectable); 2 or 3 wire |
Cell
Constants |
0.01,
0.1, 1.0, 10.0 |
Temperature
Compensation |
Auto/
manual (normalised at 25°C) |
Type
of Controller Setting |
P/PI,
Limit, Off (Monitoring);
Proportional (Pulse Length or Pulse Frequency) |
No. of Relays
Maximum Voltage
Maximum Current
High/Low Hysteresis Band |
1
SPDT, 3 SPST relays; 1 Alarm
250 VAC
3A;
0 to 10% Full Scale |
Pickup/
Dropout Delay |
0
to 2000 seconds |
Wash
Cycle/Duration |
0.1
to 199.9 hrs & 1 to 1999 sec |
IP66
- Dustproof and protection from strong jets of water (e.g., for
use on ship decks); limited entrance allowed |
Yes |
Power |
80
to 250 VAC/DC 50/60 Hz Approx. 10VA |
Dimensions
/ Weight |
Wall
Mount |
144
x 144 x 110 mm |
Panel
Mount |
96
x 96 x 175 mm |
Wall
Mount |
745g
(unit) / 1100g (packed) |
Panel
Mount |
550g
(unit) / 950g (packed) |
Wall
Mount |
IP
65 (NEMA 4X) |
Panel
Mount |
IP
54 (front panel) |
 
Copyright © 2003 Eutech Instruments
Pte Ltd. marketing@eutechinst.com
|
