Home Corporate Information What's New Our Products Support Contacts

E-Brochure

Instruction Manual

CE Certificate
Installation Guide
Technical Specifications
Press Release
Industrial Process Controllers & Monitors

alpha-pH190 1/8 DIN pH/ORP Controller with Temperature Display and Transmitter

    alpha pH190 with improved user interface enables user to gain direct access to calibration mode with CAL key and allows quick set point adjustment with SP1 and SP2 keys.

  • Quick Set Point Adjustment - SP1 and SP2 keys allow user to adjust set points easily
  • Direct Access to CAL Mode - enables user to enter calibration mode with a simple key press
  • User-Customisation with scrolling, 14-Segment LED - intuitive user interface guides user easily through setup functions
  • Symmetrical Mode Operation eliminates electronic noise problems when used with solution ground
  • Galvanically Isolated 4-20 mA Output for remote monitoring or hardcopy recording
  • Universal Power Supply Input from 85 to 250 VAC/DC allows use at multiple sites and withstands voltage fluctuations
  • Automatic Temperature Compensation with 3-wire Pt 100 system ensures accurate readings under fluctuating temperatures
  • Adjustable Hysteresis (Dead Band) prevents rapid contact switching near set point
  • Non-Volatile Memory retains all stored parameters and calibration data even if power fails
  • Easy Installation and Wiring with detachable plug-in connectors

 

Applications

General: Ideal for virtually any batch type application where pH or ORP control or adjustment is needed. Use as ORP monitor for ozone systems and general purpose pH monitor for all types of water treatment and chemical processes.

Aquaculture: Use for pH or ORP control in fish ponds and tanks.

Industrial: Use to treat batches of incoming process water, rinse water treatment, recirculating system and wastewater treatment. Suitable for pH or ORP control of plating tanks and chemical processing tanks. Ideal for low cost monitor with alarms for batch and process applications. Perfect for wastewater neutralization in small and medium sized batches.

Specifications

Product Code

EC-PHCTP0190
pH Range
0.00 to 14.00 pH
Resolution & Accuracy
0.01 pH & ±0.01 pH
mV Range
-999 to 1000mV
Resolution & Accuracy
1/ ±2.0 mV
Temperature
-10 to 110°C
Resolution & Accuracy
0.1/ ±0.5°C
Sensor
Pt 100 (3-wire)
Temperature Compensation
Automatic/ Manual (0 to 100°C)
Set-point and Controller Function
Function
Limit Control
Switching pH/ ORP Hysteresis
0.00 to 2.00 pH/ 0 to 300 mV
Contact Outputs, Controller
2 SPDT relays
Switching Voltage/ Current/ Power
Max 250 VAC/ Max 3A/ Max 600 VA
Electrical Data and Connections
Power Requirements 
85 to 260 VAC, 50/60 Hz or DC
Signal Output/ Load
4-20 mA galvanically isolated/ 200 ohms
pH/ ORP Input
BNC (1012 W  Impedance)
Connection Terminals
3 Detachable connectors (3-pin, 7-pin & 9-pin terminal blocks)
Main Fuse
250 mA, Anti-surge (BUSSMAN S504 + 250mA)
Environmental Conditions
Ambient Temp. Operating Range
- 10 to 50 °C
Rel. Humidity
10 to 95 % ( non-condensing)
IP50 - Protection from dust; limited entrance (no harmful deposit), but no protection against liquid
Yes
Mechanical Specifications
Dimensions
96 (W) X 48 (H) X 150 (D) mm
Weight
300g (350g when boxed)

Accessories

Product Order No.
pH Combination Electrode with Pt 100 RTD and PMP
EC-100GTSO-05B
pH Combination Electrode with PMP (w/o ATC)
EC-ARGTSO-05B
pH Combination Electrode with high temperature (110 oC)
and high pressure resistance (9 bar) (w/o ATC & PMP)
EC-ARHTTSO-05B
pH Combination Electrode (w/o ATC & PMP)
EC-ARTSO-05B
ORP Gold Electrode with PMP but w/o ATC EC-HTAUTSO-05B
ORP Platinum Electrode with PMP but w/o ATC EC-HTPTTSO-05B

Note: Above pH/ORP electrodes withstand up to 6 bar pressure except ECARHTTSO-05B (up to 9 bar). These electrodes have integral 5m measuring cable terminating with a BNC connector. Please contact your authorised distributor or dealer for the prices of extension measuring cables and other accessories like tee joints, electrode assembly, and calibration solutions.

Copyright © 1997 Eutech Instruments Pte Ltd. marketing@eutechinst.com