Product Features
| :: |
Ten Selectable
Conductivity Measurement Ranges in one
controller via its IP54 front panel. High-level
accuracy of ±1% of full scale can be obtained
with appropriate cells and correct temperature
coefficient |
| |
|
| :: |
User-Customization through
Advanced Setup Menu offers flexibility
in matching the controller's functions
to suit individual's specific requirement
|
| |
|
| :: |
Choice of Cell Constant
(0.01, 0.1, 1.0, 10.0) for accurate control
in any solution |
| |
|
| :: |
Hold Relay for use with
float switches/flow switches and other
controllers as a failsafe function |
| |
|
| :: |
Two Level Password Protection
prevents un authorized tampering with
settings |
| |
|
| :: |
0 to 2000 Second Time Delay
Adjustment on control and alarm delays
|
| |
|
| :: |
Galvanically Isolated
Scalebale 0-20/4-20 mA Outputs |
| |
|
| :: |
Wash Contact Relay controls
electrodes cleaning systems at desired
duration and frequency |
| |
|
| :: |
Adjustable Hysteresis (Dead
Band) prevents rapid contact switching
near set point |
| |
|
| :: |
Non-Volatile Memory retains
all stored parameters and calibration
data even if power fails |
| |
|
| :: |
Line Resistance Compensation
against intrinsic cable resistance for
longer cable connection |
| |
|
| :: |
Large Dual Display shows
measurement with temperature simultaneously
- features clear multiple icons, set points,
and status messages |
| |
|
| :: |
Choice of Temperature Sensor
Pt100/Pt1000 with 2-wire or 3-wire temperature
input selection |
| |
|
| :: |
Easy Installation and Wiring
with detachable plug-in connectors |
Applications
General: Use
for virtually any batch or online applications
where rapid, accurate control. Great for OEM/system
integrator.
Industrial:
Use in applications involving agriculture,
chemical processing, boiler and water heaters,
wafer-fab, microprocessor manufacturing, pharmaceuticals,
pulp and paper industries, and bleach manufacturing.
Water Purification/Treatment:
Use to treat batches of incoming process water,
ultrapure water, boiler and feed water control.
Regulatory:
Hook up to recorder for regulatory compliance
data collection.
Specifications
|
Product
Specification |
Description |
| Conductivity
Range |
0.000
to 1.999 µS/cm
0.01 µS/cm
0.1 µS/cm
1 µS/cm
5 µS/cm
0.01 mS/cm
0.1 mS/cm |
0.001
µS/cm
0.01 µS/cm
0.1 µS/cm
1 µS/cm
5 µS/cm
0.01 mS/cm
0.1 mS/cm |
| Accuracy |
±1
% full scale |
| Temperature
Range |
-9.9
to 125 °C |
| Resolution
& Relative Accuracy |
0.1
°C & ±0.5 °C |
| Temperature
Sensor |
Pt
100/ Pt 1000 (jumper selectable) |
| Temperature
Compensation |
Auto
/ Manual (reference at 25 °C) |
| Set
Point and Controller Functions |
| Function
|
Limit
/ Proportional (pulse or frequency)
controller |
| Switching
Hysteresis |
0
to 10% full scale |
|
Pickup / Dropout Delay |
0 to 2000 seconds |
Contact
Outputs, Controller
|
2
potential free change-over contacts |
| Switching
Voltage / Current / Power |
Max 250 VAC / Max 3A / Max 600VA |
| Alarm
Functions |
| Function
(Switchable) |
Launching
or Pulse |
| Pickup
Delay |
0
to 2000 seconds |
| Switching
Voltage / Current / Power |
Max
250 VAC / Max 3A / Max 600VA |
| Electrical
Data and Connections |
| Power
requirement |
110/
220 VAC (jumper selection) |
| Frequency
|
48
to 62Hz |
| Signal
Output |
0/4
to 20mA, galvanically isolated |
| Load |
Max.
600 Ω |
| Connection
Terminal |
Terminal
blocks 5-pole/ 17-pole, removable |
| Main
Fuse/ Fine Wire Fuse |
Slow-blow
250 V/ 100 mA |
| EMC
Specifications |
|
Emitted Interference
|
According to EN 50081-1 |
| Immunity
to Interference |
According
to EN EN 50082-1 |
| Environmental
Conditions |
| Maximum
Relative Humidity |
10
to 95%, non-condensing |
| Ambient
Temp. Operating Range |
0 to 50 °C |
| Mechanical
Specifications |
| Dimensions |
175
x 96 x 96 mm |
| Weights |
Max.
0.7kg |
| Material |
ABS
with polycarbonate |
| Insulation |
IP
54/ IP 40 |
Order Information
|
Order
No. |
Item |
| TSCONCTP1001 |
alpha
COND 1000 Controller / Transmitter with
0/4-20mA output and 110VAC setting (unit
only) |
| TSCONCTP1002 |
alpha
COND 1000 Controller / Transmitter with
0/4-20mA output and 220VAC setting (unit
only) |
Sales
Enquiry
Service
Enquiry
Products > By Type > Controllers
& Transmitters Series
alpha-COND
1000 
Sitemap
